These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.

Specifications:

Pockets & Tool Holders: 13
Weight: 1.9 lbs.
Main Tool Bag: 10" x 10"
Outer Bag: 6.5" x 5.5"
Available in left hand model as 8584LH.
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

Made in the USA

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.

Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.

Specifications:

Pockets & Tool Holders: 10
Weight: 1.7 lbs.
Main Bag: 10" x 10"
Outer Bag: 9" x 6"
Upper Bag: 5" x 4.5"
Available for Left Handed builders as 8583LH
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.

*Patent No.: US D531,401 S

Made in USA!

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.

Specifications:

Pockets & Tool Holders: 13
Weight: 1.9 lbs.
Main Tool Bag: 10" x 10"
Outer Bag: 6.5" x 5.5"
Not available in left hand model.
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

Made in the USA

Large style, all leather pouch. Suitable for both lathers and drywall pros. Exceptional tool organization and durability. Holders for circle cutter, metal snips, saw, knife, Surform®, pencils.Specifications:Pockets & Tool Holders: 11Weight: 1.4 lbs.Main Bag: 8" x 6"Tool Bags hold the tools and fasteners most often accessed with the right hand and are worn on the right side of the body.Made in USA!

These bags are 10" deep and feature a full leather boot along with a distinctive leather FatLip™ bag mouth. The leather FatLip™ keeps the bag formed, open, and protected against abrasion.

Unique patented* 2-in-1 outer bag with angle square holster between main and outer bag, 4 bags total. Also has a tri-square sleeve, cat’s paw loop and external nail set or driver bit pouches.

Specifications:

Pockets & Tool Holders: 10
Weight: 1.7 lbs.
Main Bag: 10" x 10"
Outer Bag: 9" x 6"
Upper Bag: 5" x 4.5"
Not available in left hand model.
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.

*Patent No.: US D531,401 S

Made in USA!

Same features as the 8060 with an additional outer pouch.
Specifications:

Pockets & Tool Holders: 10
Weight: 1.3 lbs.
Main Bag: 9" x 8"
Middle Bag: 8" x 6"
Outer Bag: 5.5" x 5.5"
Upper Bag: 4.5" x 4.5"
Also available for left hand builders as 8062LH
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

Same as 8018 with double outer bags. Holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax®.
Specifications:

Pockets & Tool Holders: 10
Weight: 1.3 lbs.
Main Tool Bag: 9" x 8"
Outer Bag: 5" x 5.5"
Not available in left hand model. See our Left Handed Tool Bags page for more options.
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

One of the most popular tool bags features double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax®.

Specifications:

* Pockets & Tool Holders: 11
* Weight: 2.0 lbs.
* Main Tool Bag: 9" x 8"
* Outer Bags: 5" x 5.5"
* Also available for left hand builders as 5018DBLH

Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.
Made in the USA

Same features as 5060, plus an additional outer pouch.
Specifications:

Pockets & Tool Holders: 10
Weight: 2.1 lbs.
Main Bag: 9" x 8"
Middle Bag: 7" x 6"
Outer Bag: 5.5" x 5.5"
Upper Bag: 4.5" x 4.5"
Also available for left hand builders as 5062LH
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

The most popular tool bag design with all the features of the 5018DB without an extra outer pouch and tape pocket. Holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.

Specifications:

* Pockets & Tool Holders: 9
* Weight: 1.7 lbs.
* Main Bag: 9" x 8"
* Outer Bag: 5.5" x 5.5"

Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.
Made in the USA

Our most popular tool bag design all the features of the 5018DB without the tape pocket. Double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.
Specifications:

Pockets & Tool Holders: 10
Weight: 1.9 lbs.
Main Bag: 9" x 8"
Outer Bag: 5" x 5.5"
Also available for left hand builders as 5017DBLH
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

Our most popular tool bag features holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to a 35’ FatMax®.

Specifications:

Pockets & Tool Holders: 10
Weight: 1.8 lbs.
Main Bag: 9" x 8"
Outer Bag: 5" x 5.5"
Available for left hand builders with double outer bags 5018DBLH
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

All leather compact pouch. No tool holders. Great for that third bag in the back.

Specifications:

* Weight: 0.7 lbs.
* Main Bag: 7.5" x 8"

Made in the USA

Two pouch all leather bag without internal tool holders. For those who need a straight forward serviceable utility bag.

Specifications:

* Weight: 1.3 lbs.
* Main Bag: 9" x 8"
* Outer Bag: 5.5" x 5.5"

Made in the USA

Our largest all leather bag. For those who need an extra large deep bag without tool holders.

Specifications:

* Weight: 1.7 lbs.
* Main Bag: 10" x 10"

Made in the USA

Our most popular fastener bag. Highly recommended for framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.
Specifications:

Pockets & Tool Holders: 9
Weight: 1.9 lbs.
Main Bag: 9" x 8"
Outer Bag: 7" x 6"
Upper Bag: 4.5" x 4.5"
Also available for left hand builders as 5060LH
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

For those who prefer the tape holder on the left side, we offer the 5061 with all the features of our 5060 but with tape holster in lieu of an upper bag.
Specifications:

Pockets & Tool Holders: 9
Weight: 1.7 lbs.
Main Bag: 9" x 8"
Outer Bag: 7" x 6"
Also available for left hand builders as 5061LH
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

The Beltless™ version of our popular 5062 model, features three large pouches for greater fastener organization.
Specifications:

Pockets & Tool Holders: 9

Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

The Beltless™ version of our popular 5018DB model, features dual outer bags for greater organization.
Specifications:

Pockets & Tool Holders: 10

Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

Includes loop for flashlight, chain for electrical tape, quick release tool snap, heavy duty hammer holder, pockets for screw drivers and specialized tools.
Specifications:

Pockets & Tool Holders: 15
Weight: 1.2 lbs.
Main Bag: 6.5" x 6"

Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for tri-square, cat’s paw, driver bits, angle square, tape pocket fits up to a 35’ tape. Comes stock with the very best in protection for tools, bags, and body; the 2003 - Oxy Tool Shield™.

Specifications:

Pockets & Tool Holders: 10
Weight: 2.5 lbs.
Main Bag: 11" x 9"
Outer Bag: 8.5" x 6"
Upper Bag: 4.5" x 4.5"
Not available in left hand model.
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

** Does not fit 9008 - Hip Buddies® **

Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for torpedo level, pencils, utility knife, chisels, driver bits, etc. Comes stock with the 2003 - Oxy Tool Shield™.

Specifications:

Pockets & Tool Holders: 16
Weight: 2.4 lbs.
Main Bag: 10" x 9"
Outer Bag: 5" x 5.5"
Not available in left hand model.
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

A Belt worn all leather main bag with an unique industrial nylon dual compartment outer pouch. Features six tool holders and Four pouches total.

Ample room for wire nuts, conduit couplers, and other fittings. Black leather tool holders.

Specifications:

Pockets & Tool Holders: 10
Weight: 1.8 lbs.
Main Bag: 9" x 7.5"
Outer Bag: 8" x 6"
Upper Bag: 4.5" x 4.5"
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

Made in the USA!

Compact design is ideal for trim and finish work but also suitable for light framing. Holders for 2 nail sets or driver bits, 1” blade square, cat’s paw sleeve. Angle square holster not included.
Specifications:

Pockets & Tool Holders: 8
Weight: 1.5 lbs.
Main Bag: 8" x 7.5"
Outer Bag: 6" x 5"
Also available for left hand builders as 6101LH
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

Compact design is ideal for trim and finish work, but also suitable for light framing. Holders inside for pencil, work knife, lumber crayon, and chisel. Exterior tool snap clip and heavy duty hammer loop.
Specifications:

Pockets & Tool Holders: 9
Weight: 1.4 lbs.
Main Tool Bag: 8" x 7.5"
Outer Bag: 6" x 5.5"
Also available for left hand builders as 6102LH
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

Compact plain bag with outer bag, no tool holders inside or out, for straight forward storage needs.
Specifications:

Weight: 1.0 lbs.
Main Bag: 8" x 7.5"
Outer Bag: 6" x 5.5"

Oxy Lights™ tool bag with all the features of the 8018 without the tape pocket. Holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer.
Specifications:

Pockets & Tool Holders: 9
Weight: 1.2 lbs.
Main Bag: 9" x 8"
Outer Bag: 6.5" x 5.5"
Also available in black nylon B8017
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

Our most popular OxyLights fastener bag. For framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.
Specifications:

Pockets & Tool Holders: 9
Weight: 1.2 lbs.
Main Bag: 9" x 8"
Outer Bag: 8" x 6"
Upper Bag: 4.5" x 4.5"
Available for left handed builders as 8060LH
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

Lightweight all nylon two pouch tool bag with leather holders & reinforced corners. 7 holders for nail sets or driver bits, tri-square, cat\�s paw, has leather sleeve for clip-on tape or upper bag. Specifications: Pockets & Tool Holders: 7 Weight: 0.95 lbs. Main Bag: 8" x 8" Outer Bag: 5.5" x 6" Not available in left hand model. Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body. Made in the USA

Lightweight all nylon two pouch tool bag with leather reinforced corners. Leather sleeve for clip-on tape or upper bag. Includes metal hammer holder.

Specifications:

Pockets & Tool Holders: 11
Weight: 1.3 lbs.
Main Bag: 8" x 8"
Outer Bag: 5.5" x 6"
Not available in left hand model.
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

Made in the USA

A versatile bag with a sleeve holder for the rafter square that allows easy access with either hand! Plus capacity for tools and fasteners. Ideal for that third bag

Specifications:

Weight: 0.5 lbs.
Main Bag: 8" x 5.5"
Overall Height: 12"
Made in the USA

8517 - Clip-On Carpenter Tool Bag™ This clip-on tool bag features holders for pencils, work knife, chisel, level, lumber crayon, plus a heavy duty hammer loop. Designed to fit the 2535 Builders Vest. Main tool bag corners are reinforced with OxyRed™ leather.Specifications:Pockets & Tool Holders: 9Weight: 1.2 lbs.Main Bag: 9" x 8"Outer Bag: 6.5" x 5.5"Tool Bags hold the tools most often accessed with the right hand and are worn on the right side of the body.

Large storage capacity due to unique barrel shape. Holders for nail sets or driver bits, pencil, cat\'s paw or angle square plus the 2003 tool holder on the inside front and a plier pocket on the outside. Unique patented 2-in-1™ outer bag with angle square holster between main and outer bag. Designed for use exclusively on our Clip-On vest systems.

Specifications:

Pockets & Tool Holders: 10
Weight: 1.1 lbs.
Main Bag: 10" x 8"
Outer Bag: 8" x 6"
Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.

Made in the USA

Compact multifunction pouch. Combines 6 pockets and tool holders in one space on your belt. Equipped with a 2003 Oxy Tool Shield
Just the bare essentials! Carry a tape, hammer, knife or chisel, pencils and fasteners! Perfect for small jobs.
Specifications:

Pockets & Tool Holders: 6
Weight: 0.7 lbs.
Main Bag: 6.5" x 7"

#Occidental 9501 Clip-On PouchCost efficient fastener management! Single clip-on bags make it easy to switch to different applications. Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Also can be used to add fastener storage or sub divide existing main bags.
Specifications:

Dimensions: 5" x 5.5"
Weight: 0.2 lbs.

#Occidental 9502 Clip-On Double PouchOne extra bag not enough? Get the double clip-on pouch with leather clip-on patch for cell phone, etc. Cost efficient fastener management! Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Also can be used to add fastener storage or sub divide existing main bags.
Specifications:

Main Bag: 5" x 7"
Outer Bag: 5" x 5.5"
Weight: 0.5 lbs.

Cost efficient fastener management with an angle square holster! Single clip-on larger capacity bag. Perfect for small jobs or the do it yourself weekend projects.
Specifications:

Main Bag: 7.5" x 6"
Weight: 0.4 lbs.

Cost efficient fastener management! Single clip-on bags make it easy to switch to different applications. Keep them fully loaded and neatly lined up in your truck or clipped to your toolbox when not in use. Slightly deeper and narrower than the 9501.

Specifications:

Dimensions: 5"w x 6"h x 3"d
Weight: 0.25 lbs.
Made in the USA

#Occidental 9512 Task PouchOccidental's Task Pouch provides holders for your tape measure, spiral pad, pens and pencils, screw driver, utility knife, and pliers. Accepts a 2" work belt. Made in the USA of our industrial 2-ply Cordura fabric with a foam core.

Specifications:

Dimensions: 5" x 5"
Weight: 0.4 lbs.
Made in the USA

Compact light weight bag design is ideal for trim, framing and finish work. Innovative, round-bottom nylon main and outer bags.Holders include a speed square inside or out and, features the patented* 2-in-1 outer bag for maximum fastener capacity in a compact space. Comes stock with the 2003 Oxy Tool ShieldSpecifications:Pockets & Tool Holders: 11Weight: 1.0 lbs.Main Bag: 9.5" x 7.5"Outer Bag: 9" x 6"Left handed model available as 9520LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, etc.) and are worn on the left side of the body.*Patent No.: US D531,401 SMade in USA!

Compact bag design is ideal for trim, light framing and finish work. Innovative, round-bottom, full capacity, two-ply foam core main and outer bags hold their shape empty or loaded. Clip on leather tab for tape or upper bag, driver bit or nail set pouches included, metal hammer holder. Comes stock with the 2003 - Oxy Tool Shield
Specifications:

Pockets & Tool Holders: 12
Weight: 1.0 lbs.
Main Bag: 9.5" x 7.5"
Outer Bag: 6.5" x 5.5"
Left handed model available as 9521LH
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

#1 Heavy duty Leather Bolt Bag with bull- pin loop on each side. 100% Made in U.S.A.
Belt Connection - Tunnel Belt Capacity - Up to 3" Length 5" Width 9" Depth 10"
Weight 1.6 lbs

Pro Leather™ construction bolt bag with bull-pin loop on each side. Tunnel loop on back accepts up to 3" work belt.

Specifications:

Pockets & Tool Holders: 3
Weight: 1.3 lbs.
Main Bag: 9" x 8.5"
Made in the USA

One of the most popular tool bags now available in black leather. Features double outer bags and holders for pencils, work knife, lumber crayon, chisel, torpedo level, hammer and a holster for tapes up to 35’.

Specifications:

Pockets & Tool Holders: 11
Weight: 2.1 lbs.
Main Tool Bag: 9" x 8"
Outer Bags: 5" x 5.5"
Also available for left hand builders in traditional Oxy Red™ leather as 5018DBLH
Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.

Made in the USA

B5611 - Green Building Fastener Bag In Black The best of both worlds! Classic black all leather fastener bag! Offers side by side 35' tape holster and an upper bag; external sleeve pockets, drill bit holsters, angle square holster. Internal, 2003 - Oxy Tool Shield™ (included). Main bag features reinforced back wall at stress points to insure years of durable wear.Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.Specifications:Pockets & Tool Holders: 10Weight: 2.1 lbs.Main Bag: 10"w x 9"dOuter Bag: 6.5" x 6"Upper Bag: 4.5" x 4"Also available for left hand builders as B5611LHFastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat\'s paw, driver bits, angle square, etc.) and are worn on the left side of the body.Now you have the opportunity to help the environment with your tool belt purchases. Every time you purchase a Green Building™ Series product; Occidental Leather® makes a contribution to the National audubon SocietyAudubon\'s mission is to conserve and restore natural ecosystems, focusing on birds, other wildlife, and their habitats for the benefit of humanity and the earth\'s biological diversity.Made in the USA** Does not fit 9008 - Hip Buddies® or the 5006 - Hip Pads with Sheepskin**

B5612 - Green Building™ Tool Bag - In Black The best of both worlds! Classic black all leather tool bag! Offers external leather hammer holder, double outer bags; internal storage includes one 2003 - Oxy Tool Shield™ , pockets for level, chisel, drill bits, knife, pencils and lumber crayon. Main bags feature reinforced back wall at stress points to insure years of durable wear.Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Specifications:Pockets & Tool Holders: 12Weight: 2.1 lbs.Main Bag: 10"w x 9"dOuter Bags: 5" x 5.5"Also available for left handed builders as B5612LHTool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.Now you have the opportunity to help the environment with your tool belt purchases. Every time you purchase a Green Building™ Series product; Occidental Leather® makes a contribution to the National Audubon SocietyAudubon\'s mission is to conserve and restore natural ecosystems, focusing on birds, other wildlife, and their habitats for the benefit of humanity and the earth\'s biological diversity.Made in the USA